Pressure, saturation and content
PO₂ is the partial pressure of dissolved oxygen. Saturation is the fraction of hemoglobin binding sites occupied by O₂. Content expresses oxygen quantity per volume of blood and comprises two components: hemoglobin-bound and dissolved oxygen.
Hb concentration determines binding capacity. At constant affinity, reducing Hb from 15 to 7.5 g/dL preserves saturation and halves bound oxygen. Total content also depends on dissolved oxygen and the blood water fraction.
Dash–Korman–Bassingthwaighte model
The 2016 formulation describes equilibrium O₂ binding to adult hemoglobin with a Hill equation whose exponent depends on PO₂. The coefficients correspond to the fit to Roughton and Severinghaus data.
Cooperativity means that oxygen binding favors subsequent binding. The Hill exponent summarizes this behavior; it does not equal the number of binding sites. P50 is the PO₂ that produces 50 % saturation: a higher P50 corresponds to lower affinity.
Factors affecting affinity
Within the ranges pH 7.0–7.6, temperature 30–42 °C, PCO₂ 20–60 mmHg and RBC 2,3-DPG 2–8 mmol/L, lower pH or higher values of the other three quantities increase P50. The Bohr effect comprises the influence of pH and CO₂ on affinity.
CO₂ participates in acid–base equilibrium and also forms carbamino compounds with globin. Thus, pH and PCO₂ have distinct effects on O₂ binding, although they are physiologically related.
The relationship between plasma and red cell pH is pHᵣ = 0.795·pHₚ + 1.357. 2,3-DPG, also called 2,3-BPG, is expressed per liter of packed red blood cells. pH and pressures refer to the specified temperature; varying T with the other parameters fixed describes different equilibria, not the warming of a closed sample.
Reference conditions
Reference conditions are Hb 15 g/dL, plasma pH 7.4, temperature 37 °C, PCO₂ 40 mmHg and RBC 2,3-DPG 4.65 mmol/L. Under these conditions, P50 = 26.8 mmHg.
At PO₂ = 100 mmHg, saturation is 97.62 % and total content is 20.63 mL O₂/dL. With Hb 7.5 g/dL, saturation remains 97.62 % and total content is 10.47 mL O₂/dL. Varying PO₂ moves along a curve; changing affinity conditions shifts its position. On a total content curve, P50 does not mark half of the content because dissolved O₂ is included.
Plateau and steep region
On the plateau, at high pressures, a change in PO₂ produces a relatively small change in saturation. In the steep region, the same pressure decrease releases a larger fraction of bound O₂. This difference relates the sigmoid shape to pulmonary oxygen loading and tissue oxygen unloading.
Under reference conditions, S is 97.62 % at 100 mmHg, 90.59 % at 60 mmHg and 75.19 % at 40 mmHg. These points illustrate the variable slope; they are not diagnostic thresholds. At the same PO₂, a rightward shift reduces saturation and a leftward shift increases it.
Bohr and Haldane effects
The Bohr effect describes the influence of pH and CO₂ on O₂ affinity. The Haldane effect describes the influence of oxygenation on CO₂ transport and proton binding: deoxygenated Hb has a greater capacity to bind CO₂ and H⁺. The O₂ dissociation curve alone does not quantify that CO₂ transport.
Saturation equations
In equations 6, 9a–d, 10 and 11 of the paper, P and P50 are expressed in mmHg and S is a fraction. H denotes plasma pH, C is PCO₂ in mmHg, D is RBC 2,3-DPG in mmol/L and T is temperature in °C.
Δh = 0.795·(H − 7.4)
Δc = C − 40
Δd = D/1000 − 0.00465
ΔT = T − 37
A = 26.8 − 25.535·Δh + 10.646·Δh² − 1.764·Δh³
B = 26.8 + 0.1273·Δc + 0.0001083·Δc²
Cᴅ = 26.8 + 795.63·Δd − 19660.89·Δd²
Cₜ = 26.8 + 1.435·ΔT + 0.04163·ΔT² + 0.000686·ΔT³
P50 = 26.8·(A/26.8)·(B/26.8)·(Cᴅ/26.8)·(Cₜ/26.8)
The four P50 factors combine multiplicatively. At P = 0, S = 0; at P = P50, S = 0.5.
Oxygen content and blood composition
The O₂ balance of Dash and Bassingthwaighte (2010) considers four binding sites per Hb tetramer. With an Hb molar mass of 64458 g/mol, a fixed red cell concentration of 0.00518 mol/L and water fractions of 0.94 in plasma and 0.65 in red cells:
[Hb]ᵦ = 10·Hb / 64458
[mol/L blood; Hb in g/dL]
Hct = [Hb]ᵦ / 0.00518
Wᵦ = (1 − Hct)·0.94 + Hct·0.65
α(T) = 1.46×10⁻⁶·(1 − 0.01·ΔT + 0.0004234·ΔT²)
[mol/(L water·mmHg)]
[O₂]ᵦ = 4·[Hb]ᵦ·S
[mol/L blood]
[O₂]ᵈ = Wᵦ·α(T)·P
[mol/L blood]
Content = ([O₂]ᵦ + [O₂]ᵈ)·Vₘ/10
[mL O₂/dL blood]
Hct represents the red cell volume fraction imposed by the fixed composition, equivalent to a corpuscular Hb concentration of 33.389244 g/dL. It is not an estimate of a person's hematocrit.
Vₘ = 22413.969545014 mL/mol is the molar volume of ideal dry gas at 0 °C and 101325 Pa, calculated with NIST constants. This convention remains fixed as blood temperature changes. The resulting stoichiometric capacity is 1.3909193301073 mL O₂/g Hb; it differs from the empirical coefficient 1.34 used in abbreviated clinical formulas.
Solubility depends on temperature and medium, as described by Christmas and Bassingthwaighte. The coefficient α(T) above refers to water and is multiplied by the blood water fraction. Unit conversions are 1 g/dL = 10 g/L and 1 mmHg = 0.1333224 kPa.
Physiological scope
The formulation assumes functional adult hemoglobin at equilibrium. It excludes fetal Hb, carboxyhemoglobin, methemoglobin, Hb variants and chronic adaptation. Calculated saturation is not a measurement of SpO₂ or SaO₂.
Oxygen content alone does not determine delivery to tissues, which also depends on blood flow. The equations do not describe pulmonary exchange, time-dependent diffusion or acid–base compensation.
Domain and precision
Exploration ranges do not define normal values or a multidimensional domain of clinical validation. Fitting to experimental data does not establish uniform accuracy across all combinations of pH, temperature, PCO₂ and 2,3-DPG.
Displaying four or ten significant digits expresses numerical precision; physiological uncertainty depends on experimental data and the assumptions about composition and equilibrium.